Turbelle® e-jet 1605
TUNZE
Regular price:
€118.90
No longer available
Product number:
1605.000
Instruction manual:
Product information "Turbelle® e-jet 1605"
Flow rate: 1,600 l/h (420 USgal./h)
Pumping head: 1.1 m (43.3")
Energy consumption: 12 W
Voltage / frequency:
230V/50Hz (115V/60Hz)
Cable length: 2 m (78.7")
Dimensions: ø98 x 100 mm (3.8" x 3.9")
Inlet: ø25 mm (1")
Outlet: ø25 mm (1")
Magnet holder up to a glass thickness of 15 mm (2/3").
Pumping head: 1.1 m (43.3")
Energy consumption: 12 W
Voltage / frequency:
230V/50Hz (115V/60Hz)
Cable length: 2 m (78.7")
Dimensions: ø98 x 100 mm (3.8" x 3.9")
Inlet: ø25 mm (1")
Outlet: ø25 mm (1")
Magnet holder up to a glass thickness of 15 mm (2/3").
Specifications
Turbelle® e-jet are high-performance centrifugal pumps. They have an impeller with a defined sense of rotation which is used to produce a water jet without any harmful shearing forces and fifty per cent less consumption of energy than conventional aquarium pumps. The synchronous motor with its electronic starting system offers very high reliability requiring less servicing and less current consumption. The extraordinary design, which includes the magnet holder, permits 3D adjustment and an uncomplicated attachment at any point on the aquarium pane. Without modifications, they replace all Turbelle® powerhead / electronic built since 1988.
Turbelle® e-jet are attached individually to the glass pane as circulation pumps or filters, and for this reason are supplied with magnet holder, strainer, flow deflector and filter cartridge.
Energy Saving
Low motor heat, high efficiency.
Magnetic rotors running on aqueous film bearings for low-maintenance and noiseless operation.
Titanium alloy shaft
Bearing-free pump suction side
Replaces all Turbelle® powerhead / electronic built since 1988
Performance table of e-jet pumps.
This performance table includes a tolerance of +/- 5 per cent.
Skip product gallery
Spare parts
Filter cartridges, 135 mm (5.3")
- Five spare filter cartridges with wound acrylic wadding fibers.
- Fitted with best aquarium wadding, can be washed two to five times.
- Suitable for Turbelle® e-jet, Pot Filter 820, Cartridge Filter 800 and all Comline® filters.
Nr.: 0800.010
€15.80*
*incl. 19% VAT, plus shipping costs
*incl. 19% VAT, plus shipping costs
Strainer, 12 cm (4.7")
suitable for pipe 1001.760, bushing 3000.780 and T piece 1001.800, to be used up to 4,000 l/h (1,050 US gal./h).
Nr.: 1001.790
€12.80*
*incl. 19% VAT, plus shipping costs
*incl. 19% VAT, plus shipping costs
Bushing, outside ø25 mm (.98 in.)
for Turbelle® 3005, 1605 and 5005, hose connection ø25mm (.98 in.).
Nr.: 1282.150
€6.80*
*incl. 19% VAT, plus shipping costs
*incl. 19% VAT, plus shipping costs
O-ring seal, 78x2.5mm
O-ring seal red 78x2,5mm
Nr.: 3000.020
€1.90*
*incl. 19% VAT, plus shipping costs
*incl. 19% VAT, plus shipping costs
Bushing, diam. 25 / 28 mm (.98 / 1.1 in.)
joins Turbelle® with filter.
Nr.: 3000.780
€2.90*
*incl. 19% VAT, plus shipping costs
*incl. 19% VAT, plus shipping costs
Motor block cover
for 805, 1005, 1205, 1605, 3005, 5005
Nr.: 3005.130
€5.90*
*incl. 19% VAT, plus shipping costs
*incl. 19% VAT, plus shipping costs
Flow deflector
for Turbelle® 1605 and 3005, as well as for Comline® Multifilter 3168.
Nr.: 4002.770
€7.80*
*incl. 19% VAT, plus shipping costs
*incl. 19% VAT, plus shipping costs
Silence clamp
Clamp holder for Turbelle® stream and e-jet; attachment to magnet holders 6065.50 and 6205.50; suitable for the reduction of pumping noises.
Nr.: 6065.650
€23.70*
*incl. 19% VAT, plus shipping costs
*incl. 19% VAT, plus shipping costs
Magnet Holder
Holder for the attachment of Turbelle® stream 6085, 6125 and 6105 up to a glass thickness of up to 15 mm (1/2"). Usable as a universal holder, dimensions: ø70 x B15mm.
Nr.: 6105.515
€52.50*
*incl. 19% VAT, plus shipping costs
*incl. 19% VAT, plus shipping costs
Bushing and attenuation disk
for 805, 1005, 1205, 1605, 3005, 5005, 9006.040, 9011.040
Nr.: 9011.740
€2.90*
*incl. 19% VAT, plus shipping costs
*incl. 19% VAT, plus shipping costs
Silicon buffer, 19 mm (.75 in.)
Motor block ->3000/2 115V/60Hz
Nr.: 6065.620
€5.90*
*incl. 19% VAT, plus shipping costs
*incl. 19% VAT, plus shipping costs
Skip product gallery
Accessories
Cartridge Filter 300
is a cartridge filter with ø80 x 90 mm (3.1 x 2.5 in.).
Nr.: 0300.000
€16.80*
*incl. 19% VAT, plus shipping costs
*incl. 19% VAT, plus shipping costs
Filter cartridges, 75 mm (2.9")
Ten spare filter cartridges with wound acrylic wadding fibers
Suitable for Turbelle® Pot Filter 320 and Cartridge Filter 300.
Suitable for Turbelle® Pot Filter 320 and Cartridge Filter 300.
Nr.: 0300.020
€21.70*
*incl. 19% VAT, plus shipping costs
*incl. 19% VAT, plus shipping costs
Cartridge filter mat
Two cartridge fleeces for Foam cartridge 0800.140.
Nr.: 0800.220
€2.90*
*incl. 19% VAT, plus shipping costs
*incl. 19% VAT, plus shipping costs
Cartridge 870
Refill cartridge for aquarium carbon or fine wadding with ø80 x 115 mm (3.1 " x 4.5").
Nr.: 0870.000
€27.70*
*incl. 19% VAT, plus shipping costs
*incl. 19% VAT, plus shipping costs
Cartridge Filter 1600
is a cartridge filter with ø80 x 230 mm (3.1 x 9.0 in.).
Nr.: 1600.000
€37.60*
*incl. 19% VAT, plus shipping costs
*incl. 19% VAT, plus shipping costs
Filter cartridges, 225 mm (8.8")
Five spare filter cartridges with wound acrylic wadding fibers.
Suitable for Turbelle® cartridge filter 1600.
Suitable for Turbelle® cartridge filter 1600.
Nr.: 1600.010
€21.70*
*incl. 19% VAT, plus shipping costs
*incl. 19% VAT, plus shipping costs
Cartridge Filter 800
is a cartridge filter with ø80 x 145 mm (3.1 x 5.5 in.).
Nr.: 0800.000
€25.70*
*incl. 19% VAT, plus shipping costs
*incl. 19% VAT, plus shipping costs
Magnet holder
Universal holder for attachment up to a glass thickness of 27 mm (1")
Dimensions: diam. 70 mm (2.6 in.) x W20 mm (.79 in.).
Dimensions: diam. 70 mm (2.6 in.) x W20 mm (.79 in.).
Nr.: 6205.500
€128.80*
*incl. 19% VAT, plus shipping costs
*incl. 19% VAT, plus shipping costs
Magnet extension
The unit extends the holding power of Magnet Holder 6065.515 and 6105.515 from a glass thickness of 15 mm (1/2") to 20 mm (3/4").
Nr.: 6205.501
€72.30*
*incl. 19% VAT, plus shipping costs
*incl. 19% VAT, plus shipping costs