Go to homepage
US$0.00*

Turbelle® e-jet 3005

Abbildung von 1605.000, Turbelle® e-jet 1605
Turbelle® e-jet 3005
Turbelle® e-jet 3005
Turbelle® e-jet 3005
Turbelle® e-jet 3005
Turbelle® e-jet 3005
Abbildung von 1605.000, Turbelle® e-jet 1605
Turbelle® e-jet 3005
Turbelle® e-jet 3005
Turbelle® e-jet 3005
Turbelle® e-jet 3005
Turbelle® e-jet 3005

US$168.50*

Prices incl. VAT plus shipping costs

Immediately available - delivery in 1-3 working days

Product number: 3005.000
Instruction manual:
Product information "Turbelle® e-jet 3005"
Flow rate: 3,150 l/h (830 USgal./h)
Pumping head: 1,2 m (47.2")
Energy consumption: 22 W
Voltage / frequency:
230V/50Hz (115V/60Hz)
Cable length: 2 m (78.7")
Dimensions: ø98 x 100 mm (3.8 " x 3.9")
Inlet: ø25 mm (1")
Outlet: ø25 mm (1")
Magnet holder up to a glass thickness of 15 mm (2/3").

Specifications

  

  

Turbelle® e-jet are high-performance centrifugal pumps. They have an impeller with a defined sense of rotation which is used to produce a water jet without any harmful shearing forces and fifty per cent less consumption of energy than conventional aquarium pumps. The synchronous motor with its electronic starting system offers very high reliability requiring less servicing and less current consumption. The extraordinary design, which includes the magnet holder, permits 3D adjustment and an uncomplicated attachment at any point on the aquarium pane. Without modifications, they replace all Turbelle® powerhead / electronic built since 1988.

Turbelle® e-jet are attached individually to the glass pane as circulation pumps or filters, and for this reason are supplied with magnet holder, strainer, flow deflector and filter cartridge.

 

 

Energy Saving

 

 

Low motor heat, high efficiency.

 

 

Magnetic rotors running on aqueous film bearings for low-maintenance and noiseless operation.

 

 

Titanium alloy shaft

 

 

Bearing-free pump suction side

 

 

Replaces all Turbelle® powerhead / electronic built since 1988

Performance table of e-jet pumps.

Performance table of e-jet pumps.

This performance table includes a tolerance of +/- 5 per cent.

Spare parts

Abbildung von 0800.010, Filter cartridge, 135 mm

Filter cartridges, 135 mm (5.3")

  • Five spare filter cartridges with wound acrylic wadding fibers.
  • Fitted with best aquarium wadding, can be washed two to five times.
  • Suitable for Turbelle® e-jet, Pot Filter 820, Cartridge Filter 800 and all Comline® filters.
Nr.: 0800.010
US$15.80*
*incl. 19% VAT, plus shipping costs
Abbildung von 1001.790, Schlitzkörper, 12 cm

Strainer, 12 cm (4.7")

suitable for pipe 1001.760, bushing 3000.780 and T piece 1001.800, to be used up to 4,000 l/h (1,050 US gal./h).
Nr.: 1001.790
US$12.80*
*incl. 19% VAT, plus shipping costs
Abbildung von 1282.150, Muffe außen-ø 25 mm

Bushing, outside ø25 mm (.98 in.)

for Turbelle® 3005, 1605 and 5005, hose connection ø25mm (.98 in.).
Nr.: 1282.150
US$6.80*
*incl. 19% VAT, plus shipping costs
Abbildung von 3000.020, O-Ring, 78x2,5mm

O-ring seal, 78x2.5mm

O-ring seal red 78x2,5mm
Nr.: 3000.020
US$1.90*
*incl. 19% VAT, plus shipping costs
Abbildung von 3000.130, Kreiselgehäuse

Impeller housing

Impeller housing
Nr.: 3000.130
US$34.60*
*incl. 19% VAT, plus shipping costs
Abbildung von 3000.780, Muffe ø25 / 28 mm

Bushing, diam. 25 / 28 mm (.98 / 1.1 in.)

joins Turbelle® with filter.
Nr.: 3000.780
US$2.90*
*incl. 19% VAT, plus shipping costs
Abbildung von 3005.015, Motorblock

Motor block

for 3005
Nr.: 3005.015
US$79.20*
*incl. 19% VAT, plus shipping costs
Abbildung von 3005.130, Motorblockdeckel

Motor block cover

for 805, 1005, 1205, 1605, 3005, 5005
Nr.: 3005.130
US$5.90*
*incl. 19% VAT, plus shipping costs
Abbildung von 3005.700, Antriebseinheit

Drive unit

for 3005
Nr.: 3005.700
US$31.60*
*incl. 19% VAT, plus shipping costs
Abbildung von 1001.770, Strömungswinkel

Flow deflector

for Turbelle® 1605 and 3005, as well as for Comline® Multifilter 3168.
Nr.: 4002.770
US$7.80*
*incl. 19% VAT, plus shipping costs
Abbildung von 6065.650, Silence Klemme Stream

Silence clamp

Clamp holder for Turbelle® stream and e-jet; attachment to magnet holders 6065.50 and 6205.50; suitable for the reduction of pumping noises.
Nr.: 6065.650
US$23.70*
*incl. 19% VAT, plus shipping costs
Abbildung von 6105.515, Magnet Holder

Magnet Holder

Holder for the attachment of Turbelle® stream 6085, 6125 and 6105 up to a glass thickness of up to 15 mm (1/2"). Usable as a universal holder, dimensions: ø70 x B15mm.
Nr.: 6105.515
US$52.50*
*incl. 19% VAT, plus shipping costs
Abbildung von 6200.509, 8 Elastikpuffer für Magnet Holder

8 elastic pads for Magnet Holder

Nr.: 6200.509
US$5.90*
*incl. 19% VAT, plus shipping costs
Abbildung von 9011.740, Lager- u. Dämpfungsscheibe

Bushing and attenuation disk

for 805, 1005, 1205, 1605, 3005, 5005, 9006.040, 9011.040
Nr.: 9011.740
US$2.90*
*incl. 19% VAT, plus shipping costs
Abbildung von 6065.620, Silikonpuffer, 19 mm, 4 Stück

Silicon buffer, 19 mm (.75 in.)

Motor block ->3000/2 115V/60Hz
Nr.: 6065.620
US$5.90*
*incl. 19% VAT, plus shipping costs

Accessories

Abbildung von 0800.000, Cartridge Filter 800

Cartridge Filter 800

is a cartridge filter with ø80 x 145 mm (3.1 x 5.5 in.).
Nr.: 0800.000
US$25.70*
*incl. 19% VAT, plus shipping costs
Abbildung von 0800.140, Foam cartridge

Foam cartridge

Filter cartridge made of aquarium sponge to be used separately or with Cartridge filter mat 0800.220.
Nr.: 0800.140
US$6.80*
*incl. 19% VAT, plus shipping costs
Abbildung von 0800.220, Cartridge filter mat

Cartridge filter mat

Two cartridge fleeces for Foam cartridge 0800.140.
Nr.: 0800.220
US$2.90*
*incl. 19% VAT, plus shipping costs
Abbildung von 0870.000, Cartridge 870

Cartridge 870

Refill cartridge for aquarium carbon or fine wadding with ø80 x 115 mm (3.1 " x 4.5").
Nr.: 0870.000
US$27.70*
*incl. 19% VAT, plus shipping costs
Abbildung von 1600.000, Cartridge Filter 1600

Cartridge Filter 1600

is a cartridge filter with ø80 x 230 mm (3.1 x 9.0 in.).
Nr.: 1600.000
US$37.60*
*incl. 19% VAT, plus shipping costs
Abbildung von 1600.010, Filter cartridges, 225 mm

Filter cartridges, 225 mm (8.8")

Five spare filter cartridges with wound acrylic wadding fibers.
Suitable for Turbelle® cartridge filter 1600.
Nr.: 1600.010
US$21.70*
*incl. 19% VAT, plus shipping costs
Abbildung von 6205.500, Magnet Holder

Magnet holder

Universal holder for attachment up to a glass thickness of 27 mm (1")
Dimensions: diam. 70 mm (2.6 in.) x W20 mm (.79 in.).
Nr.: 6205.500
US$128.80*
*incl. 19% VAT, plus shipping costs
Abbildung von 6205.501, Magnet Extension

Magnet extension

The unit extends the holding power of Magnet Holder 6065.515 and 6105.515 from a glass thickness of 15 mm (1/2") to 20 mm (3/4").
Nr.: 6205.501
US$72.30*
*incl. 19% VAT, plus shipping costs
This website uses cookies to ensure the best experience possible. More information...