Reef design
Premium-Aquarientechnik von TUNZE® — präzise, langlebig und Made in Germany.
Sort by:
Aquarium tongs
- Anodized aluminum and 316L stainless steel – rust-proof & durable.
- Foldable for easy, space-saving storage.
- With practical hanging loop.
- Length: 86 cm (33.86") – ideal for deep tanks!
- Gripper jaws provided with rubber slats on the inside.
Art. no.
0220.440
US$29.90
Incl. VAT, plus shipping
Magnet holder
- Universal holder for attachment up to a glass thickness of 15 mm (5/8”), dimensions: ø50 mm (1.9 in.) x W11/15 mm (.44/.6 in.).
Art. no.
6025.515
US$34.60
Incl. VAT, plus shipping
Coral Gum instant, 120 g (4.23 oz.)
- Coral Gum instant is a two-component coral adhesive for safe cementing of coral fragments to stone substrates.
- No deleterious matter or adhesive residue is introduced into the aquarium water; it is unbreakable, yet remains flexible and withstands high loads.
- Can be used in fresh-water and marine aquariums.
- Contents: 2 x 60 g (4.23 oz.)
Art. no.
0104.750
US$21.70
Incl. VAT, plus shipping
Coral Gum fast 115 g (4.06oz.)
- Two-component epoxy putty. Particularly suitable for fixing hard corals on frag plugs or in the reef.Processing time: 3-4 min. Handling strength: 8-10 min (continues to cure up to 24 hours later).Content: 115 g (4 oz.)
Art. no.
0104.747
US$9.80
Incl. VAT, plus shipping
Aquarium tongs Carbon
- Free of aluminum – only plastic and 316L stainless steel.
- Foldable for easy, space-saving storage.
- With practical hanging loop.
- Length: 86 cm (33.86") – ideal for deep tanks!
- Gripper jaws provided with rubber slats on the inside
Art. no.
0220.450
US$69.90
Incl. VAT, plus shipping
Coral Gel, 20 g (0.7 oz.)
- Gel-like, thixotropic superglue. Does not run, can also be applied on vertical surfaces. Particularly suitable for bonding when fragmenting soft corals. Also suitable for slightly porous substrates. Contents: 20 g (0.7 oz.)
Art. no.
0104.730
US$8.80
Incl. VAT, plus shipping
Magnet holder
- Universal holder for attachment up to a glass thickness of 12 mm (½"), dimensions: diam. 50 mm (1.9 in.) x W 11/15 mm (.44/.,6 in.).
Art. no.
6025.512
US$28.70
Incl. VAT, plus shipping
Offset Magnet Osmolator® 3
- The offset magnet allows the sensor of the Osmolator® 3 (3154.000) and Osmolator® 3 nano (3151.000) models to be precisely adjusted upwards within a range of 1 to 18 mm (0.04"–0.71") (5). Thanks to the special design, the sensor is positioned 10.7 mm (0.42") from the glass pane (6), which makes it easy to install it even on aquariums with a protruding frame. For frames with a height of up to 21.4 mm (0.84"), the sensor can be mounted using two offset magnets. This solution is suitable for glass thicknesses of a maximum of 12 mm (1/2").Caution: Please note the maximum glass thickness to ensure safe and stable installation!
Art. no.
3151.501
US$14.80
Incl. VAT, plus shipping
Magnet Holder for pH/mV probes
- The TUNZE® probe holder offers a flexible and secure mounting solution for standard pH and millivolt probes (12 mm diameter) in aquariums. The proven TUNZE® magnetic platform ensures reliable attachment, designed in this configuration for glass thicknesses up to 12 mm. A particular advantage: the probe can be positioned freely in the aquarium, independent of the water level, braces, lids, or other edge-mounted elements. This allows exceptional flexibility in installation.The magnets are sealed and processed in Germany, with the rest of the product also manufactured in Germany. Additionally, the product provides especially gentle support for the probe through silicone buffers that absorb minor impacts, minimizing the risk of damage. Thanks to the well-thought-out plug-and-play design, the probe holder is easy and quick to install. With a 5-year warranty, the probe holder ensures long-lasting reliability and quality.
Art. no.
7070.301
US$39.60
Incl. VAT, plus shipping
Coral Rack nano
- Growing stone for the placement of corals.
- Consists of a highly porous ceramic stone with a Live Rock Function.
- Lindentations to accommodate approximately 6 coral fragments as well as Reef Plugs (approx.ø11mm/.43 in).
- Suitable for fresh and sea water.
- With strong magnet holder suitable for aquaria up to 15 mm (2/3") glass thickness.
Art. no.
0104.800
US$69.30
Incl. VAT, plus shipping
Coral Gum instant, 400 g (14.11oz.)
- Coral Gum instant is a two-component coral adhesive for safe cementing of coral fragments to stone substrates.
- No deleterious matter or adhesive residue is introduced into the aquarium water; it is unbreakable, yet remains flexible and withstands high loads.
- Contents: 2 x 200 g (14.11oz.)
Art. no.
0104.760
US$43.50
Incl. VAT, plus shipping
Coral Rack long
- Growing stone for the placement of corals.
- Consists of a highly porous ceramic stone with a Live Rock Function.
- Indentations to accommodate approximately 8 coral fragments as well as Reef Plugs (approx. ø11mm/.43in)
- Suitable for fresh and sea water.
- Thanks to the two strong magnetic holders, the Coral Rack long is suitable for aquariums with a glass thickness of up to 12mm (1/2").
Art. no.
0104.820
US$89.20
Incl. VAT, plus shipping
Tube magnet holder
- Magnet holder for mounting tubes with ø25mm (1"). Suitable for glass and plastic containers with a pane / wall thickness up to 12 mm (1/2").Dimensions: ø50 mm (1.97 in.), W 41 mm (1.61 in.).
Art. no.
8850.500
US$27.70
Incl. VAT, plus shipping
Magnet holder
- Universal holder for attachment up to a glass thickness of 15 mm (1/2") for Stream3, dimensions: ø50/70 mm (2/2.6 in.) x W15 mm (.6 in.).
Art. no.
6150.515
US$45.50
Incl. VAT, plus shipping
Magnet holder
- Universal holder for attachment up to a glass thickness of 27 mm (1")Dimensions: diam. 70 mm (2.6 in.) x W20 mm (.79 in.).
Art. no.
6205.500
US$128.80
Incl. VAT, plus shipping
Magnet Holder 6025.515, 24 pieces
- Universal holder for attachment up to a glass thickness of 15 mm (5/8”), Dimensions: ø50 mm (1.9") x W11/15 mm (.44/.06"), 24 magnet holders in a box.
Art. no.
6025.525
US$694.10
Incl. VAT, plus shipping
Tip
reef360° DIY
- reef360° is not a conventional reef structure...reef360° is a kinetic platform for living corals!Precisely controlled solely by the flow in the aquarium, uncompromisingly reduced in design and engineered for exceptional aquariums.The flat, transparent base plate (ø 140 mm / 5.5") integrates almost invisibly into minimalist layouts.The carbon tube is height-adjustable in 8 mm (0.3") increments from 140 to 162 mm (5.5" - 6.4") for precise adaptation to flow, lighting and perspective.Inside, a combination of the proven Turbelle® stream 3 bearing and a full-ceramic ball bearing ensures outstanding performance.The result: extremely smooth rotation, exceptional running quietness and long-term durability.The plug-in reef adapter allows convenient preparation of the structure outside the aquarium and later replacement without interfering with the construction.reef360° creates a new form of presentation:Uniform, varied flow and light exposure. Controlled motion. Maximum design freedom.This spinning reef is the natural evolution of the popular flying reef. The current reaches the corals optimally not only from above and below, but also from all sides thanks to its rotation around the central axis. Each individual coral is thus exposed to varying flow intensities.The reef360° is passively powered. That means no motor, no plug, and no metal parts in the water. Zero risk for your animals!Dimensions: ø 140 mm, adjustable height from 140 to 162 mm (5.5" - 6.4")The aquarist decorates it themselves with reef rock or ceramic.
Art. no.
0360.000
US$199.90
Incl. VAT, plus shipping
Magnet Holder 6025.512, 24 pieces
- Universal holder for attachment up to a glass thickness of 12 mm (½")Dimensions: ø50 mm (1.9") x W11/15 mm (.44/.06"), 24 magnet holders in a box.
Art. no.
6025.526
US$545.30
Incl. VAT, plus shipping
Tip
reef360° nano, ø20-25cm
- reef360° is not a conventional reef structure...reef360° is a kinetic platform for living corals!Precisely controlled solely by the flow in the aquarium, uncompromisingly reduced in design and engineered for exceptional aquariums.The flat, transparent base plate (ø 140 mm / 5.5") integrates almost invisibly into minimalist layouts.The carbon tube is height-adjustable in 8 mm (0.3") increments from 140 to 162 mm (5.5" - 6.4") for precise adaptation to flow, lighting and perspective.Inside, a combination of the proven Turbelle® stream 3 bearing and a full-ceramic ball bearing ensures outstanding performance.The result: extremely smooth rotation, exceptional running quietness and long-term durability.The plug-in reef adapter allows convenient preparation of the structure outside the aquarium and later replacement without interfering with the construction.reef360° creates a new form of presentation:Uniform, varied flow and light exposure. Controlled motion. Maximum design freedom.This spinning reef is the natural evolution of the popular flying reef. The current reaches the corals optimally not only from above and below, but also from all sides thanks to its rotation around the central axis. Each individual coral is thus exposed to varying flow intensities.The reef360° is passively powered. That means no motor, no plug, and no metal parts in the water. Zero risk for your animals!Dimensions kinetic platform: ø 140 mm, adjustable height from 140 to 162 mm (5.5" - 6.4")Dimensions reef ceramic: ø 20–25 cm (7.9" - 9.8"), height 10–15 cm (4.9" - 7.3")The bundle also includes a handcrafted reef ceramic in a branch look for individual design with coral frags.
Art. no.
0360.200
US$499.90
Incl. VAT, plus shipping
Tip
reef360° standard, ø35-40cm
- reef360° is not a conventional reef structure...reef360° is a kinetic platform for living corals!Precisely controlled solely by the flow in the aquarium, uncompromisingly reduced in design and engineered for exceptional aquariums.The flat, transparent base plate (ø 140 mm / 5.5") integrates almost invisibly into minimalist layouts.The carbon tube is height-adjustable in 8 mm (0.3") increments from 140 to 162 mm (5.5" - 6.4") for precise adaptation to flow, lighting and perspective.Inside, a combination of the proven Turbelle® stream 3 bearing and a full-ceramic ball bearing ensures outstanding performance.The result: extremely smooth rotation, exceptional running quietness and long-term durability.The plug-in reef adapter allows convenient preparation of the structure outside the aquarium and later replacement without interfering with the construction.reef360° creates a new form of presentation:Uniform, varied flow and light exposure. Controlled motion. Maximum design freedom.This spinning reef is the natural evolution of the popular flying reef. The current reaches the corals optimally not only from above and below, but also from all sides thanks to its rotation around the central axis. Each individual coral is thus exposed to varying flow intensities.The reef360° is passively powered. That means no motor, no plug, and no metal parts in the water. Zero risk for your animals!Dimensions kinetic platform: ø 140 mm, adjustable height from 140 to 162 mm (5.5" - 6.4")Dimensions reef ceramic: ø 35-40 cm (13.8" - 15.8"), height 15-20 cm (7.3" - 7.9")The bundle also includes a handcrafted reef ceramic in a branch look for individual design with coral frags.
Art. no.
0360.300
US$599.90
Incl. VAT, plus shipping