![Temperature Controller](/fileadmin/images/product_database/7028.000.jpg)
The Temperature Controller is a compilation consisting of the SmartController 7000 and its appropriate switching socket, the Controlled Power Socket 7070.120 in a separate package.
All matching accessory articlesWithin a single device, the TUNZE® SmartController 7000 combines all important functions needed to create natural conditions within the aquarium. Till now, this required a variety of controller devices, where the alignment among the individual units often couldn't be implemented in a functional manner. The advantages of the new user-friendly all-in-one solution from TUNZE® are an easy handling, the clear overview and the optional compact installation into nearly any kind of aquarium furniture or the wall mounting.
The SmartController 7000 can control all Turbelle® electronic pumps and TUNZE® LEDs, switching sockets and valves. In addition, it measures and regulates the temperature, the pH value and the redox potential. The settings can be easily performed through a web interface with any Wi-Fi-enabled device which uses a web browser. But even without a Wi-Fi enabled device, it is possible to quickly and easily perform the basic settings via the touch panel.
Together with Turbelle® pumps, it is possible to reproduce complex ocean flow conditions in the aquarium. In conjunction with the TUNZE® LEDs, the course of a day just like in real nature can be simulated with the pumps. For this, the LEDs can be adapted to the brightness of the respective seasons. The fail-safe real time clock even stores the time during power outages, and without a leak-
prone battery. The SmartController 7000 is able to maintain a constant temperature, and also regulate the heating or cooling.
The galvanically decoupled pH / redox measurement guarantees an accurate measuring result at any time, regardless of all other connected electronic devices. The SmartController 7000 directly controls a solenoid valve, and thus the CO2 level to obtain a constant pH value in the aquarium or in the calcium reactor; with redox control and ozone, it controls a controlled power socket.
In case of a power failure, the SmartController 7000 no longer controls any output. If flow pumps are connected to a safety connector 6105.500, the SmartController 7000 must also be connected to
a safety connector.
from moisture.
or redox potential.
/ parental control.
/ LEDs / controlled power sockets / valves.
probe
pumps with electronic motor and TUNZE® controller. They can reproduce real reef currents in your tank. TUNZE® controller concentrate on the fundamentals. The following flow patterns can be produced in the aquarium very easily:
By setting the maximum and minimum outputs as well as the pulse duration, high and low water velocities can be produced generating a natural wash of waves under a one-metre water column.
The pump channels are switched on or off alternately. The water flows through the reef
from both sides at an adjustable switching time from 1 minute up to 12 hours.
The Turbelle® pumps are started sequentially, which permits the generation of a swelling current.
Random flow is generated by wave simulation and sequential pump operation. For quite a number of special reef zones (surf) this combination may produce an interesting water movement.
The prices listed in the catalogue are given in USD and contain a value-added tax of 0%. Additional information: