Turbelle® e-jet 1605
- Flow rate: 1,600 l/h (420 USgal./h)
- Flow rate: 1,600 l/h (420 USgal./h) Pumping head: 1.1 m (43.3 in.)
- Energy consumption: 12 W Voltage / frequency: 230V/50Hz (115V/60Hz)
- Magnet holder up to a glass thickness of 15 mm (1/2").
- Cable length: 2 m (78.7 in.) Dimensions: ø98 x 100 mm (3.8 x 3.9 in.) Inlet: ø25 mm (1 in.) Outlet: ø25 mm (1 in.)
Regular price:
US$134.99
Excl. VAT, plus shipping
No longer available
Art. no.
1605.000
Instruction manual:
Description
Flow rate: 1,600 l/h (420 USgal./h)
Pumping head: 1.1 m (43.3")
Energy consumption: 12 W
Voltage / frequency:
230V/50Hz (115V/60Hz)
Cable length: 2 m (78.7")
Dimensions: ø98 x 100 mm (3.8" x 3.9")
Inlet: ø25 mm (1")
Outlet: ø25 mm (1")
Magnet holder up to a glass thickness of 15 mm (2/3").
Pumping head: 1.1 m (43.3")
Energy consumption: 12 W
Voltage / frequency:
230V/50Hz (115V/60Hz)
Cable length: 2 m (78.7")
Dimensions: ø98 x 100 mm (3.8" x 3.9")
Inlet: ø25 mm (1")
Outlet: ø25 mm (1")
Magnet holder up to a glass thickness of 15 mm (2/3").
Specifications
Turbelle® e-jet are high-performance centrifugal pumps. They have an impeller with a defined sense of rotation which is used to produce a water jet without any harmful shearing forces and fifty per cent less consumption of energy than conventional aquarium pumps. The synchronous motor with its electronic starting system offers very high reliability requiring less servicing and less current consumption. The extraordinary design, which includes the magnet holder, permits 3D adjustment and an uncomplicated attachment at any point on the aquarium pane. Without modifications, they replace all Turbelle® powerhead / electronic built since 1988.
Turbelle® e-jet are attached individually to the glass pane as circulation pumps or filters, and for this reason are supplied with magnet holder, strainer, flow deflector and filter cartridge.
Energy Saving
Low motor heat, high efficiency.
Magnetic rotors running on aqueous film bearings for low-maintenance and noiseless operation.
Titanium alloy shaft
Bearing-free pump suction side
Replaces all Turbelle® powerhead / electronic built since 1988
Performance table of e-jet pumps.
This performance table includes a tolerance of +/- 5 per cent.
Compatible products
Note: In the product manual you will find helpful information on replacing and correctly installing the spare part.
Skip product gallery
Spare parts
Filter cartridges, 135 mm (5.3")
- Five spare filter cartridges with wound acrylic wadding fibers.
- Fitted with best aquarium wadding, can be washed two to five times.
- Suitable for Turbelle® e-jet, Pot Filter 820, Cartridge Filter 800 and all Comline® filters.
Art. no.
0800.010
US$18.99
Excl. VAT, plus shipping
Strainer, 12 cm (4.7")
- suitable for pipe 1001.760, bushing 3000.780 and T piece 1001.800, to be used up to 4,000 l/h (1,050 US gal./h).
Art. no.
1001.790
US$14.99
Excl. VAT, plus shipping
Bushing, outside ø25 mm (.98 in.)
- for Turbelle® 3005, 1605 and 5005, hose connection ø25mm (.98 in.).
Art. no.
1282.150
US$5.79
Excl. VAT, plus shipping
Bushing, diam. 25 / 28 mm (.98 / 1.1 in.)
- joins Turbelle® with filter.
Art. no.
3000.780
US$4.79
Excl. VAT, plus shipping
Motor block cover
- for 805, 1005, 1205, 1605, 3005, 5005
Art. no.
3005.130
US$4.29
Excl. VAT, plus shipping
Flow deflector
- for Turbelle® 1605 and 3005, as well as for Comline® Multifilter 3168.
Art. no.
4002.770
US$8.79
Excl. VAT, plus shipping
Silence clamp
- Clamp holder for Turbelle® stream and e-jet; attachment to magnet holders 6065.50 and 6205.50; suitable for the reduction of pumping noises.
Art. no.
6065.650
US$26.79
Excl. VAT, plus shipping
Magnet Holder
- Holder for the attachment of Turbelle® stream 6085, 6125 and 6105 up to a glass thickness of up to 15 mm (1/2"). Usable as a universal holder, dimensions: ø70 x B15mm.
Art. no.
6105.515
US$64.49
Excl. VAT, plus shipping
Bushing and attenuation disk
- for 805, 1005, 1205, 1605, 3005, 5005, 9006.040, 9011.040
Art. no.
9011.740
US$3.79
Excl. VAT, plus shipping
Silicon buffer, 19 mm (.75 in.)
- Motor block ->3000/2 115V/60Hz
Art. no.
6065.620
US$5.49
Excl. VAT, plus shipping
Skip product gallery
Accessories
Cartridge Filter 300
- is a cartridge filter with ø80 x 90 mm (3.1 x 2.5 in.).
Art. no.
0300.000
US$19.99
Excl. VAT, plus shipping
Filter cartridges, 75 mm (2.9")
- Ten spare filter cartridges with wound acrylic wadding fibersSuitable for Turbelle® Pot Filter 320 and Cartridge Filter 300.
Art. no.
0300.020
US$24.99
Excl. VAT, plus shipping
Cartridge filter mat
- Two cartridge fleeces for Foam cartridge 0800.140.
Art. no.
0800.220
US$4.49
Excl. VAT, plus shipping
Cartridge 870
- Refill cartridge for aquarium carbon or fine wadding with ø80 x 115 mm (3.1 " x 4.5").
Art. no.
0870.000
US$34.99
Excl. VAT, plus shipping
Cartridge Filter 1600
- is a cartridge filter with ø80 x 230 mm (3.1 x 9.0 in.).
Art. no.
1600.000
US$44.99
Excl. VAT, plus shipping
Filter cartridges, 225 mm (8.8")
- Five spare filter cartridges with wound acrylic wadding fibers.Suitable for Turbelle® cartridge filter 1600.
Art. no.
1600.010
US$24.99
Excl. VAT, plus shipping
Cartridge Filter 800
- is a cartridge filter with ø80 x 145 mm (3.1 x 5.5 in.).
Art. no.
0800.000
US$29.99
Excl. VAT, plus shipping
Magnet holder
- Universal holder for attachment up to a glass thickness of 27 mm (1")Dimensions: diam. 70 mm (2.6 in.) x W20 mm (.79 in.).
Art. no.
6205.500
US$149.99
Excl. VAT, plus shipping
Magnet extension
- The unit extends the holding power of Magnet Holder 6065.515 and 6105.515 from a glass thickness of 15 mm (1/2") to 20 mm (3/4").
Art. no.
6205.501
US$79.99
Excl. VAT, plus shipping