LED A80 Tuna Sun

£174.90*

Immediately available - delivery in 1-3 working days

Product number: KSA80TS
Product information "LED A80 Tuna Sun"
The elegant fanless design of the A80 Tuna Sun LED for freshwater aquariums is combined with a unique and compact Dense Matrix array and optics design which ensures efficient coverage and penetration as well as the most lumens per watt output of any Kessil® fixture.

Technical Specifications:
Spectrum: 6,000 to 9,000K
Coverage: Up to 24" (60 cm) surface diameter
Power Supply: 100-240V AC (input), 24V DC (output)
Power Consumption: 15 W Dimensions (H x D): 4.88" x 0.98" (124 x 25 mm)
Weight: 0.88 lb (400 g)

Scope of delivery:
1x H80 Tuna Sun LED
1x DC Power Supply
1x Top Mounting Adapter

Specifications

Shimmer effect

Shimmer effect

Beautiful, unrivaled shimmer replicates the look of natural sunlight reflecting from the water.

Color management / colour mixing

Color management / colour mixing

Different wavelengths are seamlessly blended within a single LED array, emitting uniform color across the coverage range.

Tunable without loss of performance

Tunable without loss of performance

Spectrum and intensity can be individually adjusted directly on the lamp housing. Kessil® Logic ™ ensures consistent power output across the entire adjustable spectrum.

Cooling / Heat management

Cooling / Heat management

An innovative heat dissipation allows for fanless, low maintenance, elegant design.

Dense Matrix LED technology for superior illumination

Dense Matrix LED technology for superior illumination

The patented Kessil® Dense Matrix LED technology concentrates multiple LED chips into a single array (cluster / bundle), creating a powerful and penetrating light source with wide coverage, even light distribution and natural, vibrant lighting effects. The lens on the matrix ensures that it is not too bright directly under the lamp and yet, at the same time not too dark at the edges. Penetration can be further enhanced by positioning multiple units in close proximity to each other.

Compatible with 0 -10 V external controllers / Spectral Controller

Compatible with 0 -10 V external controllers / Spectral Controller

Daisy-chain multiple lights for seamless control from a single source.



Simple control with only one device:

- At manual mode you can instantly tune spectrum and intensity for on demand light customization:

- The quick set creates unique dawn and dusk effects by altering light intensity and color throughout six different time points.

- With an acclimation mode the introduction of new lights to a tank or new plants / corals to an existing setup is very easy. The acclimation timeline can be customized to suit specific needs.

Spare parts

Replacement Mounting Accessories

Replacement mounting accessories. Includes gooseneck brackets and screws for A80, A160, and A360(X) series lights.
Nr.: KSP006
£33.90*
*incl. 19% VAT, plus shipping costs

Power Supply 24V-24W for A80, H80 EU plug

Weight: 0.3 lb / 140 g
Dimensions (bundled): 3.9" x 3.6" x 1.3" (100 x 92 x 32 mm)
Nr.: KSUPS2424
£56.90*
*incl. 19% VAT, plus shipping costs

Accessories

Spectral Controller X

  • Light control for Kessil® A360XE, A360X, A500X LEDs and 0-10 V lights.
  • Featuring the intelligent communication system K-Link.
  • Clear color display with touch controls.
  • One controller, two ports — K-Link port and 0-10V output.
  • Effortless programming of the light control for endless customization options of up to 32 lights.
Nr.: KSASC02
£129.90*
*incl. 19% VAT, plus shipping costs

Type 1 Control Cable (for Neptune Controller)

Connection cable between external controller and Kessil LED A80 / A160 / A360W / A360N.
Length: 6 feet (1.8 m) excluding connectors
Plug Types: 1/8" (3.5 mm) stereo male phono plug to RJ45 plug
Compatible with Neptune Apex Controller
Nr.: KSACB01
£32.90*
*incl. 19% VAT, plus shipping costs

Type 2 Control Cable (for Digital Aquatics Controller)

Connection cable between external controller and Kessil LED A80 / A160 / A360W / A360N.
Length: 6 feet (1.8 m) excluding connectors
Plug Types: 1/8" (3.5 mm) stereo male phono plug to two 2POS 3mm single row plugs
Compatible with Digital Aquatics Controller
Nr.: KSACB02
£32.90*
*incl. 19% VAT, plus shipping costs

Unit Extension Cable

6 feet Extension Cable for either between lights or between controller and light.
Length: 6 feet (1.8 m) excluding connectors
Plug Types: 1/8" (3.5 mm) stereo male phono plug to 1/8" (3.5 mm) stereo female phono jack
Nr.: KSACB04
£32.90*
*incl. 19% VAT, plus shipping costs

Mini A-Series Gooseneck

Kessil's A80 Gooseneck is a versatile mounting option that allows you to customize the positioning of your light. The 10 inch arm attaches the Kessil A80 aquarium light securely to the top of a tank without a canopy.

Weight: 0.73 lb / 330 g
Dimensions: ø 0.57" x H 10" (ø 15 mm x H 254 mm)

Scope of delivery:
1x Gooseneck Base
2x Plastic Screw
1x Plastic Stepper
2x Thumb Screw
1x A80 Gooseneck
1x Gooseneck Bracket
Nr.: KSAGN03
£33.90*
*incl. 19% VAT, plus shipping costs

19V DC Power Extension Cable 6 feet, (1.8 m)

Weight: 0.26 lb / 120 g
Dimensions (bundled): 6.7" x 2.3" x 1.2" (170 x 59 x 30 mm)
Nr.: KSUCB19
£49.90*
*incl. 19% VAT, plus shipping costs

90° Unit Link Cable - 10 feet

The Kessil 90° Unit Link Cable connects any of 0~ 10V-controllable Kessil lights to each other or to the Spectral Controller. Required to link canopy-mounted Kessil A80 LEDs.
Length: 10" (3 m) excluding connectors
Plug Types: 1/8" (3.5 mm) stereo male phono plug to 1/8" (3.5 mm) stereo male phono plug
Nr.: KSULC10
£32.90*
*incl. 19% VAT, plus shipping costs